国产日韩欧美毛片在线

Hello, welcome to Yangzhou jingzhuo experimental Machinery Factory official website!
Hotline: 0514-86274822 / 153 7126 1889

Top search terms: Rubber low temperature brittleness tester Mooney Viscometer Vulcanizator Rubber rotor free vulcanizer Plastic material tensile machine Test equipment manufacturer

Current location: home page > news information >Technical articles

Application of rubber low temperature brittleness tester

Source: Yangzhou jingzhuo experimental Machinery Factory Time of publication: Release time: 2016-11-05 Reading times: 1976
??? Rubber low temperature brittleness tester It is used to measure the highest temperature of rubber when it is damaged by impact under specified conditions, i.e. brittleness temperature. It can be used to compare the performance of non hard plastics and other elastic materials at low temperature. The advantages and disadvantages of temperature and low temperature performance. The following is a detailed introduction Rubber low temperature brittleness tester Use of.

1. Inject the frozen medium (generally industrial ethanol) into the cold well, and the injection amount should ensure that the distance between the lower end of the gripper and the liquid level is 75 ± 10 mm.

2. Turn on the power, and the temperature controller and timer display lights will be on.

3. Clamp the sample vertically on the holder. The clamp should not be too tight or too loose to prevent the specimen from deformation or falling off.

4. Press the holder to freeze the sample, and start the timing control switch (or press the stopwatch) to time. The freezing time of the sample is 3.0 ± 0.5min. During the freezing period, the temperature fluctuation of freezing medium shall not exceed ± 1 ℃.

5. Pull the self-locking handle of the impact hammer, and the impact hammer will fall freely under the action of gravity to impact the sample.

6. Take down the sample, bend the sample to 180 ° according to the impact direction, and carefully observe whether there is any damage.

7. After the sample is impacted (only one impact is allowed for each sample), the temperature of the frozen medium shall be increased in case of damage, otherwise, the temperature of the freezing medium shall be reduced and the test shall be continued. Through repeated tests, the minimum temperature for at least two specimens not to be damaged and the maximum temperature for at least one specimen to be damaged are determined. If the difference between the two results is no more than 1 ℃, the test is over.

??? Yangzhou jingzhuo experimental Machinery Factory is specialized in material test and research. It can test rubber, plastic, metal, pipe, copper, paper, building materials, textile, cable, spring, wood and so on. It can provide all kinds of test for machinery manufacturing industry, metallurgy and mining, automobile and ship, petrochemical industry, scientific research and colleges, energy, transportation, aerospace and other industries Testing instruments and technical services. Tel: 15371261889

Share with:
contact us Contact Us
Hotline: 0514-86274822

Tel: 153 7126 1889

Fax: 0514-86271989

Email: jzsyyq@126.com

Address: Zhenwu Industrial Park, Jiangdu District, Yangzhou